Frage zu LX-6400 bzw. LW-600 Thema WPA2/3

Forum zu den aktuellen LANCOM Wireless Accesspoint Serien, z.B.: L-45x, L-460, L32x ...

Moderator: Lancom-Systems Moderatoren

Antworten
ua
Beiträge: 524
Registriert: 29 Apr 2005, 12:29
Kontaktdaten:

Frage zu LX-6400 bzw. LW-600 Thema WPA2/3

Beitrag von ua »

Tach Zusammen,

folgendes Szenario:

Bestand:
WLC-4006+ und 4x 17xx-AP (verschiedene Modelle)
SSID A WPA2/3-PSK, Standard+fastroaming, mgmt-frames Verschlüsselung optional (ausgegraut)
SSID B WPA2/3-Enterprise, Standard+fastroaming, mgmt-frames Verschlüsselung optional (ausgegraut)
SSID C WPA2, leps-u, Standard+fastroaming, mgmt-frames Verschlüsselung optional

Soweit funktioniert alles. Da WPA3 Mgmt.Frames generell verschlüsselt, ist der Punkt wohl ausgegraut. Bei Umstellung auf WPA 2 ist er schaltbar. Clients können sich problemlos anmelden (auf allen SSID).

Jetzt kommen je ein LX6400 und LW600 (FW 5.20.0047RU1) dazu:
Die SSID sind ausgerollt, jedoch können sich keine Clients an den WPA2/3-SSID anmelden, mutmaßlich hängt es an der mgmt-Frame-Protection (die auch im Web-GUI des AP auf mandatory steht). Aber leider kann ich gar nichts sehen, wie traced man auf den Dingern?

Viele Grüße aus OBC

Udo

PS Noch etwas: Es scheint, als deaktivierten die LXer über den WLC entfernte SSID nicht sofort. Es werden auch etliche Minuten später noch Clients auf der SSID angezeigt (Web-GUI des AP), auch ist eine Anmeldung an den Bestandsnetzen erst nach Abschaltung der LXer wieder möglich?
... das Netz ist der Computer ...
n* LC und vieles mehr...

Cytor
Beiträge: 145
Registriert: 17 Mai 2012, 15:19
Kontaktdaten:

Re: Frage zu LX-6400 bzw. LW-600 Thema WPA2/3

Beitrag von Cytor »

Hallo,

grundsätzlich verhält sich das mit PMF /11w so: Bei WPA3 wird PMF erzwungen. Bei WPA2/3 mixed-mode wird PMF nur für Clients erzwungen, die WPA3 verwenden wollen. Für WPA2-Clients wird PMF optional erlaubt. Dies ist bei LCOS und LCOS LX gleich. Mag sein, dass es in der Webconfig von LCOS LX nicht ganz klar rüberkommt :wink:

Unter LX lässt sich sich ähnlich tracen, wie im LCOS: tr # wlan auf der CLI um den WLAN-Trace zu togglen. Mit trace # wlan --log kommen noch die historische Logeinträge mit, soweit das Log zurück reicht.

Evtl. zur Eingrenzung auf den APs auch mal Fast-Roaming abschalten?

ua
Beiträge: 524
Registriert: 29 Apr 2005, 12:29
Kontaktdaten:

Re: Frage zu LX-6400 bzw. LW-600 Thema WPA2/3

Beitrag von ua »

Hallo Cytor,

dank für die Info, bin jetzt auch schon etwas weiter. Die LX-6400 hängen ohne Probleme am WLC und tuen was sie sollen.

Eine Herausforderung ist noch der LW-600. Dieser lässt sich problemlos an den Controller anbinden.
So weit so gut, aber nach Reboot aller Komponenten (WLC, AP via "Steckdosenleiste") kommt der LW-600 nicht mehr wieder an den AP, die LXer laufen wie vorher.

Anbei der CAPWAP-Trace vom LW-600. Alle AP sind mit der neuesten Firmware ausgestattet, der WLC hat 10.42 (mit 10.40 ging es auch nicht). Alle Geräte im selben L2-Netz.

Viele Grüße aus OBC

Udo

Code: Alles auswählen

Using username "root".
#
| LANCOM LW-600
-- snip --
root@:/
> trace # capwap
Automatic-Firmware-Updater      OFF
Capwap                          ON
Client-Management               OFF
Firmware                        OFF
IAPP                            OFF
Kernel                          OFF
LMC                             OFF
Mapper                          OFF
SNMP                            OFF
SSH                             OFF
Sys                             OFF
WLAN                            OFF

root@:/
> [Syslog] 2020/06/28 11:41:48,503 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:41:48,503 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:41:48,503 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:41:48,503 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:41:48,528 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:41:48,528 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:41:53,593 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:41:53,593 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:41:53,593 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:41:53,593 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:41:53,618 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:41:53,618 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:41:53,648 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:53,648 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:41:53,648 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:41:53,648 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:41:53,648 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:41:53,649 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:41:48,650 : capwap[1682]: Discovery response get wlc timestamp [1593344518][2020/06/28 11:41:58] local [1593344513][2020/06/28 11:41:53]
[Syslog] 2020/06/28 11:41:48,651 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:41:58] current [2020/06/28 11:41:48]
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:41:48,683 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: Discovery Response with invalid sequence (3 != 2)
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:48,684 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:41:48,686 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:41:48,686 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:41:48,686 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:41:48,686 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:41:53,691 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:41:53,691 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:41:53,691 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:41:53,691 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:41:53,717 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:41:53,717 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:53,749 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:41:53,828 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:53,828 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:41:53,828 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:41:53,828 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:41:53,829 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:41:53,829 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:41:53,829 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
[Syslog] 2020/06/28 11:42:23,855 : capwap[1682]: WTP change state from SULKING to IDLE
[Syslog] 2020/06/28 11:42:23,855 : capwap[1682]: Autark mode
[Syslog] 2020/06/28 11:42:23,857 : capwap[1682]: Go to discovery search enabled [1] configured prefered ac [0]
[Syslog] 2020/06/28 11:42:23,857 : capwap[1682]: Start EV_IO on socket 10
[Syslog] 2020/06/28 11:42:23,857 : capwap[1682]: WTP change state from IDLE to DISCOVERY
[Syslog] 2020/06/28 11:42:23,857 : capwap[1682]: Discovery interval configured [20000] to wait [4464]
[Syslog] 2020/06/28 11:42:33,352 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:42:33,352 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:42:33,352 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:42:33,352 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:42:33,377 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:42:33,377 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:42:33,408 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:42:33,409 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:42:38,409 : capwap[1682]: Discovery response get wlc timestamp [1593344568][2020/06/28 11:42:48] local [1593344553][2020/06/28 11:42:33]
[Syslog] 2020/06/28 11:42:38,410 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:42:48] current [2020/06/28 11:42:38]
[Syslog] 2020/06/28 11:42:38,441 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:38,441 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:42:47,212 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:42:47,213 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:42:47,213 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:42:47,213 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:42:52,219 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:42:52,219 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:42:52,219 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:42:52,219 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:42:52,247 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:42:52,247 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:52,278 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:42:52,358 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
[Syslog] 2020/06/28 11:43:22,384 : capwap[1682]: WTP change state from SULKING to IDLE
[Syslog] 2020/06/28 11:43:22,384 : capwap[1682]: Autark mode
[Syslog] 2020/06/28 11:43:22,387 : capwap[1682]: Go to discovery search enabled [1] configured prefered ac [0]
[Syslog] 2020/06/28 11:43:22,387 : capwap[1682]: Start EV_IO on socket 10
[Syslog] 2020/06/28 11:43:22,387 : capwap[1682]: WTP change state from IDLE to DISCOVERY
[Syslog] 2020/06/28 11:43:22,387 : capwap[1682]: Discovery interval configured [20000] to wait [3953]
[Syslog] 2020/06/28 11:43:31,372 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:43:31,372 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:43:31,372 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:43:31,372 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:43:31,396 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:43:31,397 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:43:31,429 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:43:31,430 : capwap[1682]: Discovery response get wlc timestamp [1593344621][2020/06/28 11:43:41] local [1593344611][2020/06/28 11:43:31]
[Syslog] 2020/06/28 11:43:31,430 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:43:41] current [2020/06/28 11:43:31]
[Syslog] 2020/06/28 11:43:31,464 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:31,464 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:43:38,584 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:43:38,584 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:43:38,584 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:43:38,584 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:43:43,587 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:43:43,587 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:43:43,587 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:43:43,587 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:43:43,617 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:43:43,617 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:43,649 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:43:43,729 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
[Syslog] 2020/06/28 11:44:13,755 : capwap[1682]: WTP change state from SULKING to IDLE
[Syslog] 2020/06/28 11:44:13,755 : capwap[1682]: Autark mode
[Syslog] 2020/06/28 11:44:13,757 : capwap[1682]: Go to discovery search enabled [1] configured prefered ac [0]
[Syslog] 2020/06/28 11:44:13,757 : capwap[1682]: Start EV_IO on socket 10
[Syslog] 2020/06/28 11:44:13,757 : capwap[1682]: WTP change state from IDLE to DISCOVERY
[Syslog] 2020/06/28 11:44:13,757 : capwap[1682]: Discovery interval configured [20000] to wait [19393]
[Syslog] 2020/06/28 11:44:38,191 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:44:38,191 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:44:38,191 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:44:38,191 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:44:38,217 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:44:38,217 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:44:38,248 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:44:38,249 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: Discovery response get wlc timestamp [1593344688][2020/06/28 11:44:48] local [1593344678][2020/06/28 11:44:38]
[Syslog] 2020/06/28 11:44:38,250 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:44:48] current [2020/06/28 11:44:38]
[Syslog] 2020/06/28 11:44:38,283 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:38,283 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:44:39,669 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:44:39,669 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:44:39,669 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:44:39,669 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:44:44,674 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:44:44,674 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:44:44,674 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:44:44,675 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:44:44,696 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:44:44,696 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:44:44,728 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:44:44,729 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:44:44,729 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:44,729 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:44:44,808 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:44:44,809 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
[Syslog] 2020/06/28 11:45:14,838 : capwap[1682]: WTP change state from SULKING to IDLE
[Syslog] 2020/06/28 11:45:14,838 : capwap[1682]: Autark mode
[Syslog] 2020/06/28 11:45:14,840 : capwap[1682]: Go to discovery search enabled [1] configured prefered ac [0]
[Syslog] 2020/06/28 11:45:14,840 : capwap[1682]: Start EV_IO on socket 10
[Syslog] 2020/06/28 11:45:14,840 : capwap[1682]: WTP change state from IDLE to DISCOVERY
[Syslog] 2020/06/28 11:45:14,840 : capwap[1682]: Discovery interval configured [20000] to wait [16135]
[Syslog] 2020/06/28 11:45:36,021 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:45:36,021 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:45:36,021 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:45:36,021 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:45:36,046 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:45:36,046 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:45:36,078 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:45:36,081 : capwap[1682]: Discovery response get wlc timestamp [1593344746][2020/06/28 11:45:46] local [1593344736][2020/06/28 11:45:36]
[Syslog] 2020/06/28 11:45:36,081 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:45:46] current [2020/06/28 11:45:36]
[Syslog] 2020/06/28 11:45:36,111 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:36,111 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:45:50,354 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:45:50,354 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:45:50,354 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:45:50,354 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:45:55,360 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:45:55,360 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:45:55,360 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:45:55,360 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:45:55,396 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:45:55,396 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:45:55,428 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:45:55,429 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:45:55,429 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:55,429 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:45:55,508 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:55,508 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:45:55,509 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:45:55,509 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:45:55,509 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:45:55,509 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:45:55,509 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING
[Syslog] 2020/06/28 11:46:25,538 : capwap[1682]: WTP change state from SULKING to IDLE
[Syslog] 2020/06/28 11:46:25,538 : capwap[1682]: Autark mode
[Syslog] 2020/06/28 11:46:25,540 : capwap[1682]: Go to discovery search enabled [1] configured prefered ac [0]
[Syslog] 2020/06/28 11:46:25,540 : capwap[1682]: Start EV_IO on socket 10
[Syslog] 2020/06/28 11:46:25,540 : capwap[1682]: WTP change state from IDLE to DISCOVERY
[Syslog] 2020/06/28 11:46:25,540 : capwap[1682]: Discovery interval configured [20000] to wait [6876]
[Syslog] 2020/06/28 11:46:37,451 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:46:37,451 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:46:37,451 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:46:37,451 : capwap[1682]: Warning: error to send discovery request packet
[Syslog] 2020/06/28 11:46:37,487 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:46:37,487 : capwap[1682]: Send discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: WTP got data: r: 169
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 33
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 5
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:48
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: vendor read_ops: 0x460d28
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:49
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: vendor read_ops: 0x460d00
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 6
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 10
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 1
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: no data to read empty
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:2
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: vendor read_ops: 0x461160
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: MESSAGE ELEMENT: 37
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: VENDOR MESSAGE ELEMENT: 2356:1
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: vendor read_ops: 0x461188
[Syslog] 2020/06/28 11:46:37,518 : capwap[1682]: wlc priority name [LAB-WLC][1]
[Syslog] 2020/06/28 11:46:37,520 : capwap[1682]: Discovery response get wlc timestamp [1593344807][2020/06/28 11:46:47] local [1593344797][2020/06/28 11:46:37]
[Syslog] 2020/06/28 11:46:37,520 : capwap[1682]: Discovery response set wlc timestamp [2020/06/28 11:46:47] current [2020/06/28 11:46:37]
[Syslog] 2020/06/28 11:46:37,552 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:37,552 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:46:46,054 : capwap[1682]: WTP change state from DISCOVERY to PMTU_DISCOVERY
[Syslog] 2020/06/28 11:46:46,054 : capwap[1682]: Add mtu discovery element 1452 1500 8 8
[Syslog] 2020/06/28 11:46:46,054 : capwap[1682]: Count 0 Fragment 0
[Syslog] 2020/06/28 11:46:46,054 : capwap[1682]: Count 1 Fragment 0
[Syslog] 2020/06/28 11:46:51,058 : capwap[1682]: wtp/dfa_discovery.cpp:56 Could not resolve application.acdiscovery.host WLC-Address
[Syslog] 2020/06/28 11:46:51,058 : capwap[1682]: Unable to send packet, sendto return -1 with error 22
[Syslog] 2020/06/28 11:46:51,058 : capwap[1682]: Unable to send fragment, sentto return error -22
[Syslog] 2020/06/28 11:46:51,058 : capwap[1682]: Warning: error to send PMTU discovery request packet
[Syslog] 2020/06/28 11:46:51,095 : capwap[1682]: Use default broadcast address 10.100.100.255
[Syslog] 2020/06/28 11:46:51,095 : capwap[1682]: Send PMTU discovery 10.100.100.255 port 1027
[Syslog] 2020/06/28 11:46:51,128 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:51,128 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:46:51,128 : capwap[1682]: MESSAGE ELEMENT: 52
[Syslog] 2020/06/28 11:46:51,128 : capwap[1682]: MTU padding allowed 1452
[Syslog] 2020/06/28 11:46:51,129 : capwap[1682]: New MTU padding 1500
[Syslog] 2020/06/28 11:46:51,129 : capwap[1682]: PMTU discovery 1
[Syslog] 2020/06/28 11:46:51,129 : capwap[1682]: WTP change state from PMTU_DISCOVERY to DTLS_CONNECT
[Syslog] 2020/06/28 11:46:51,129 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:51,129 : capwap[1682]: WTP got data: r: -1
[Syslog] 2020/06/28 11:46:51,208 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:51,208 : capwap[1682]: WTP got data: r: 1472
[Syslog] 2020/06/28 11:46:51,209 : capwap[1682]: Receive CAPWAP Control Channel message
[Syslog] 2020/06/28 11:46:51,209 : capwap[1682]: WTP got data: r: 1003
[Syslog] 2020/06/28 11:46:51,209 : capwap[1682]: Error in DTLS handshake: ASN no signer error to confirm failure
[Syslog] 2020/06/28 11:46:51,209 : capwap[1682]: Stop EV_IO on socket 10
[Syslog] 2020/06/28 11:46:51,209 : capwap[1682]: WTP change state from DTLS_CONNECT to SULKING


root@:/
> trace # capwap
Automatic-Firmware-Updater      OFF
Capwap                          OFF
Client-Management               OFF
Firmware                        OFF
IAPP                            OFF
Kernel                          OFF
LMC                             OFF
Mapper                          OFF
SNMP                            OFF
SSH                             OFF
Sys                             OFF
WLAN                            OFF

root@:/
>
... das Netz ist der Computer ...
n* LC und vieles mehr...

ua
Beiträge: 524
Registriert: 29 Apr 2005, 12:29
Kontaktdaten:

Re: Frage zu LX-6400 bzw. LW-600 Thema WPA2/3

Beitrag von ua »

Hab' mal ein Ticket eingestellt ...
... das Netz ist der Computer ...
n* LC und vieles mehr...

Antworten
  • Vergleichbare Themen
    Antworten
    Zugriffe
    Letzter Beitrag

Zurück zu „LANCOM Wireless aktuelle Accesspoint, z.B.: L-45x, L-460, L32x, L-305agn, L-310agn, OAP-310agn,L-315dual, L-320agn, L-321agn, L-322agn Dual, OAP-321, IAP-321, OAP-382“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 7 Gäste