ich bin neu hier und mache gerade meine ersten Erfahrungen mit LANCOM-Hardware und Netzwerktechnik in dieser "Tiefe". Als Router nutze ich:
- 1790-4G+
Firmware-Version 10.72.0092SU2
Nach einem Geräte-Reset auf Werkseinstellungen und Durchführen des Setup-Assistenten (DS-Lite, Einwahl über PPPoE) scheint soweit auch alles zu funktionieren. Laut LOG klappt die Einwahl und ich erhalte eine IPv6 sowie den DS-Lite AFTR: Die Verbindung mit IPv6 (z.B. heise/golem.de) funktioniert:
Code: Alles auswählen
root@1790-4G+:/
> ping -r www.google.de
0 Traceroute 2a00:79c0:1::1:102 seq.no=0 time=1.260 ms
1 Traceroute 2a00:79c0:2::e01 seq.no=1 time=5.028 ms
2 Traceroute 2a00:79c0:2::e02 seq.no=2 time=5.752 ms
3 Traceroute 2001:4860::12:0:b408 seq.no=3 time=7.844 ms
4 Traceroute 2001:4860:0:1::3169 seq.no=4 time=5.533 ms
Traceroute 2a00:1450:4001:810::2003 seq.no=5 time=5.607 ms
---2a00:1450:4001:810::2003 ping statistic---
56 Bytes Data, 6 Packets transmitted, 6 Packets received, 0% loss
Code: Alles auswählen
root@1790-4G+:/
> ping -r 8.8.8.8
0 Traceroute *
1 Traceroute *
2 Traceroute *
Traceroute 8.8.8.8 seq.no=5 time out
---8.8.8.8 ping statistic---
56 Bytes Data, 6 Packets transmitted, 0 Packets received, 100% loss
Code: Alles auswählen
root@1790-4G+:/
> show ip-addresses
#Loopback (Loopback) - Rtg-Tag: 0 Interface ID: 1
127.0.0.1/32, PREFERRED, (NO DAD PERFORMED) (Type: Loopback) valid: infinite
::1/128, PREFERRED, (NO DAD PERFORMED) (Type: Loopback) preferred: infinite valid: infinite
INTERNET - Rtg-Tag: 0 VLAN-ID: 0 Interface-ID: 3 Peer: INTERNET:
fe80::a0:57ff:fe6f:a9f6/64, PREFERRED, (NO DAD PERFORMED) (Type: Primary Link Local Address) preferred: infinite valid: infinite
2a00:79c0:660:c700:a0:57ff:fe6f:a9f6/56, PREFERRED, (NO DAD PERFORMED) (Type: DHCPv6 Client IA_PD) preferred: 571s valid: 571s
INTERNET_DSLITE - Rtg-Tag: 0 VLAN-ID: 0 Interface-ID: 4 Peer: INTERNET_DSLITE:
192.0.0.2/32, PREFERRED, (NO DAD PERFORMED) (Type: Local WAN) valid: infinite
INTRANET - Rtg-Tag: 0 VLAN-ID: 0 Interface-ID: 2 Interface: LAN-1:
10.13.1.1/24, PREFERRED, (NO DAD PERFORMED) (Type: Local LAN) valid: infinite
fe80::2a0:57ff:fe6f:a9f6/64, PREFERRED, none (Type: Primary Link Local Address) preferred: infinite valid: infinite
2a00:79c0:660:c701::/64, PREFERRED, (ANYCAST) (Type: Subnet-Router Anycast) preferred: 604800s valid: 2592000s
2a00:79c0:660:c701:2a0:57ff:fe6f:a9f6/64, PREFERRED, none (Type: Auto Configuration) preferred: 604800s valid: 2592000s
Edit: Ergänzend noch die Ausgabe zum ipv4-route:
Code: Alles auswählen
> show ipv4-route
IPv4 Unicast FIB
Rtg-Tag 0
Prefix Next-Hop Interface ID Masquerading Redistribution Type (Distance)
--------------------------------------------------------------------------------------------------------------------------
0.0.0.0/0 0.0.0.0 INTERNET_DSLITE 4 no Redistribute Static (5)
10.13.1.0/24 0.0.0.0 INTRANET 2 no Redistribute Connected LAN (2)
10.13.1.1/32 0.0.0.0 #Loopback 1 no Redistribute Local LAN (0)
127.0.0.0/8 0.0.0.0 #Loopback 1 no Never Loopback (0)
127.0.0.1/32 0.0.0.0 #Loopback 1 no Never Loopback (0)
192.0.0.2/32 0.0.0.0 #Loopback 1 no Redistribute Local WAN (0)
Über Hilfe/Feedback wäre ich extrem dankbar!
Grüße,
HuTcH