Nun verbindet er sich zwar aber Daten können nicht empfangen werden
Tx läuft hoch jedoch bleibt Rx bei 0
Hier mal die Log aus dem Client:
Code: Alles auswählen
24.03.2010 13:11:10MONITOR: Installed - LANCOM Advanced VPN Client 210 Build 58 (910)
24.03.2010 13:11:10MONITOR: Licensed - LANCOM Advanced VPN Client 210
24.03.2010 13:11:50System: Protecting RAS adapter - 0
24.03.2010 13:11:50System: Protecting RAS adapter - 0
24.03.2010 13:11:50System: Protecting RAS adapter - 0
24.03.2010 13:11:51IPSec: Start building connection
24.03.2010 13:11:51IPSec: DNSREQ: resolving dnserver over lan: xxxxxx.de
24.03.2010 13:11:51IPSec: DNSREQ: resolved ipadr: 212.144.000.000
24.03.2010 13:11:51Ike: phase1:name(hweid) - outgoing connect request - aggressive mode.
24.03.2010 13:11:51Ike: XMIT_MSG1_AGGRESSIVE - hweid
24.03.2010 13:11:52Ike: RECV_MSG2_AGGRESSIVE - hweid
24.03.2010 13:11:52Ike: IKE phase I: Setting LifeTime to 28800 seconds
24.03.2010 13:11:52Ike: IkeSa negotiated with the following properties -
24.03.2010 13:11:52 Authentication=PRE_SHARED_KEY,Encryption=AES,Hash=SHA,DHGroup=2,KeyLen=128
24.03.2010 13:11:52Ike: hweid ->Support for NAT-T version - 9
24.03.2010 13:11:52IPSec: Final Tunnel EndPoint is:212.144.000.000
24.03.2010 13:11:52Ike: Turning on NATD mode - hweid - 1
24.03.2010 13:11:52Ike: XMIT_MSG3_AGGRESSIVE - hweid
24.03.2010 13:11:52Ike: IkeSa negotiated with the following properties -
24.03.2010 13:11:52 Authentication=PRE_SHARED_KEY,Encryption=AES,Hash=SHA,DHGroup=2,KeyLen=128
24.03.2010 13:11:52Ike: Turning on DPD mode - hweid
24.03.2010 13:11:52Ike: phase1:name(hweid) - connected
24.03.2010 13:11:52SUCCESS: IKE phase 1 ready
24.03.2010 13:11:52IPSec: Phase1 is Ready - IkeIndex=3
24.03.2010 13:11:52IPSec: Quick Mode is Ready: IkeIndex = 00000003 , VpnSrcPort = 4500
24.03.2010 13:11:52IPSec: Assigned IP Address: 192.168.9.16
24.03.2010 13:11:52IkeQuick: XMIT_MSG1_QUICK - hweid
24.03.2010 13:11:52IkeQuick: RECV_MSG2_QUICK - hweid
24.03.2010 13:11:52IkeQuick: Turning on PFS mode(hweid) with group 2
24.03.2010 13:11:52IkeQuick: XMIT_MSG3_QUICK - hweid
24.03.2010 13:11:52IkeQuick: phase2:name(hweid) - connected
24.03.2010 13:11:52SUCCESS: Ike phase 2 (quick mode) ready
24.03.2010 13:11:52IPSec: Created an IPSEC SA with the following characteristics -
24.03.2010 13:11:52 IpSrcRange=[192.168.9.16-192.168.9.16],IpDstRange=[0.0.0.0-255.255.255.255],IpProt=0,SrcPortRange=[0-65535],DstPortRange=[0-65535]
24.03.2010 13:11:52IPSec: connected: LifeDuration in Seconds = 20160 and in KiloBytes = 0
24.03.2010 13:11:52IPSec: Connected to hweid on channel 1.
24.03.2010 13:11:52PPP(Ipcp): connected to hweid with IP Address: 192.168.009.016. : 192.168.009.017.
24.03.2010 13:11:52SUCCESS: IpSec connection ready
24.03.2010 13:12:02SUCCESS: Link -> <hweid> IP address assigned to IP stack - link is operational.
24.03.2010 13:12:12Ike: NOTIFY : hweid : SENT : NOTIFY_MSG_R_U_HERE : 36136
24.03.2010 13:12:12Ike: NOTIFY : hweid : RECEIVED : NOTIFY_MSG_R_U_HERE_ACK : 36137
24.03.2010 13:12:32Ike: NOTIFY : hweid : SENT : NOTIFY_MSG_R_U_HERE : 36136
24.03.2010 13:12:42Ike: NOTIFY : hweid : SENT : NOTIFY_MSG_R_U_HERE : 36136
24.03.2010 13:12:52Ike: NOTIFY : hweid : SENT : NOTIFY_MSG_R_U_HERE : 36136
24.03.2010 13:13:01ERROR - 4035: IKE(phase1):Disconnect due to no DPD response.
24.03.2010 13:13:02Ike: phase1:name(hweid) - error - DPD timer response expired
24.03.2010 13:13:02IPSec: Disconnected from hweid on channel 1.